NICREW Single Channel LED Light Timer

  • Can also be used as a dimmer, the brightness can be adjusted from 1 – 100%
  • Simulate sunrise & sunset to reduce stress in aquarium fish
  • One channel timer only, cannot control one light with two channel
  • Automatically turns your aquarium lights on and off for you by setting it once
  • Suitable for NICREW ClassicLED, ClassicLED Plus, SkyLED, SkyLED Plus and other lights with standard 2.5mm/2.1mm power connectors
Category:

Description

Overview
Enjoy high-end LED control with minimal effort. Nicrew One Channel LED Timer easily upgrades your LED light fixture with a gradual light-up and dim-down feature found in high-end LED fixtures. Aquarium lighting connected to the thisone channel timer simulates a gradual sunrise and sunset each day to prevent stressful light shock experienced when aquariums transition from complete darkness to full brightness.

Functions
This timer is an easy to install and program single-channel timer featuring 24-hour LED aquarium lighting control with two modes: 15-minute ramp up/dim down or instant ON/OFF.(Please refer to the user manual for setting instruction). Large LCD display with simple push button keypad allows hassle-free operation that easy on your eyes. Internal memory stores your pre-programmed times in the event of a power failure.

Specifications
Max. Voltage: 30V
Max. Current: 4A

Downloads

FAQ

How to reset the timer?
Press SET and POWER buttons together for 3 seconds to reset it to factory settings. The timer setting such as “straight on and off” and “sunrise and sunset” will be disabled by default.

What is the most common size of DC connector?
The most common sizes are 2.1mm and 2.5mm. You should always check with the manufacturer of the electronic device to be certain.

Why my light does not turn on/off in 15 minutes?
Only the light intensity is 100%, will the led light be set to turn on/off in 15 minute.

Why is my LED light not as bright as it should be when using this Timer?
Please check the light intensity and increase it to 100%.

If the power goes out, will the timer remember my setting?
Yes. The timer has an internal memory which will store your settings, but you still need to reset the current time.

NOTICE: Attention must be paid to the connection of I/P and O/P, to protect the equipment and ensure normal use.